Khoom npe thiab hom: Antistatic Zaj Duab XisYM30 Series
Khoom TSEEM CEEB NTA
Ib leeg lossis ob chav primer, cov tshuaj tiv thaiv zoo tshaj plaws thiab nyuaj rau ncua, tiaj tiaj, zoo thermal endurance, zoo nto nto zoo.
Daim Ntawv Thov Tseem Ceeb
Siv rau cov tshuaj tiv thaiv cov yeeb yaj kiab tiv thaiv, cov tshuaj tiv thaiv antistatic tiv thaiv zaj duab xis stcky (cov tshuaj pov thawj tshuaj tiv thaiv kab mob).
Lub tsev
Cov Ntawv Sau
Lub thickness ntawm ym30a suav nrog: 38μm, 50μm, 75μm, 75μm, 100μm thiab 125μm, thiab lwm yam.
| Ntiag tug | Ib yam | Cov nqi raug | Txoj kev xeem | ||
| Qhov tuab | μm | 38 | 50 | ASTM D374 | |
| Lub zog tensile | MD | MPa | 254 | 232 | ASTM D882 |
| TD | MPa | 294 | 240 | ||
| Elongation | MD | % | 153 | 143 | |
| TD | % | 124 | 140 | ||
| Thaum Tshav Kub Kub Shrinkage | MD | % | 1.24 | 1.15 | ASTM D1204 (150 ℃ × 30min) |
| TD | % | 0.03 | -0.01 | ||
| Cov coefficient ntawm kev sib txhuam | μs | - | 0.32 | 0.28 | ASTM D1894 |
| μd | - | 0.39 | 0.29 | ||
| Kev hloov pauv | % | 93.8 | 92.8 | ASTM D1003 | |
| Pos huab | % | 1.97 | 2.40 | ||
| Nto tiv thaiv | Ω | 105-10 | GB 13542.4 | ||
| Adhesive ceev | % | ≥97 | Cov hau kev lattic | ||
| Kev ntub dej ntub | DYNE / CM | 58/58 | 58/58 | ASTM D2578 | |
| Kev tshwm sim | - | OK | EMTC txoj kev | ||
| Hais txog | Saum toj no yog cov kev tsim nuj nqis, tsis tau lees tias yuav muaj nuj nqis. Yog tias cov neeg muas zaub muaj cov kev cai tshwj xeeb, raws li cov lus cog lus ua tiav. | ||||
Kev ntsuas ntub dej nro tsuas yog siv rau Corkona kho zaj duab xis.
YM30 koob muaj xws li YM30, YM30A, YM31, lawv txawv ntawm qhov ua primer.
Lub Sijhawm Post: Sep-03-2024
